Boot sequence: EC--> BIOS

1. Brush EC

1. Download ITEFlash_WIN EC-AXB35-02-1.06-GMK.ZIP to the desktop and decompress it: as shown in the following figure:

2. Double-click to open the ITEFlash_WIN EC-AXB35-02-1.06-GMK folder, as shown in the following figure:

3. Right-click the "FEC" file and select Run as Administrator. As shown in the following figure:

4. In the process of flashing the machine, as shown in the following figure:

5. After the successful boot, the command box will display Update EC Rom sucessfully and close the command window, indicating that the boot is successful, as shown in the following figure:

matters need attention:

1. In the process of EC brushing, the program will run automatically and the external equipment can move freely,
2. Do not close the window, power off, shut down, restart, etc.,
3. When the EC file is loaded and the operation window is automatically closed, you need to shut down the machine and unplug the power cable, and then start the machine

2. Brush BIOS

Check the BIOS version

Enter MSINFO32 with WIN+R to view the BIOS version/date

1. Place the downloaded AXB3502_GMK_R104.zip on the desktop and decompress it as shown in the following figure:

2. Enter the path of AXB3502_GMK_R104\Afu_WinFlash as shown in the figure below:

3. Double-click the file "AXB3502_GMK_BIOS_WinFlash" to run it. As shown in the following figure:

      4. It is in the process of being updated, as shown in the following figure:

matters need attention:

1. During the BIOS process, the program will run automatically and limit the activity of external devices (mouse, keyboard, etc.)
2. Do notcut off power, shut down or restart at this time
3. The BIOS file will be automatically shut down after the BIOS file is loaded

If the device is unable to use due to power failure, shutdown or restart during the process of booting up, contact the original manufacturer for replacement of the motherboard